You can simply press the small red button on the side for less than 10 seconds. This will cause a reset but will maintain the current configuration settings.
Pressing the RESET button on the side of the unit for at least 10 seconds will factory reset your GigaMesh.
The GigaMesh must be plugged into any available 110 VAC standard outlet. The GigaMesh can be oriented in any direction. Note: the Wi-Fi signal strength indicator lights are referenced from the “up” orientation.
The GigaMesh can extend network Wi-Fi coverage using either a wired or wireless connection back to the GigaSpire, but not both at the same time. If you want to switch from wired to wireless or vice versa, you will need to reset the GigaMesh back to factory settings by pressing the RESET button on the side for at least 10 seconds and go back through the setup process.